Products

Back to all products

Electrofusion fittings for non potable water pipes

Maximum fusion integrity for the longevity of your pipeline

Specifically designed for ease of assembly and to provide optimum efficiency during the welding process, our range of universal black electrofusion fittings offers specifiers and installers a high performance jointing solution for their whole polyethylene pipeline.

Designed for drinking water and wastewater, natural and suitable manufactured gases polyethylene pipelines, our range of electrofusion fittings are made from high strength black PE100, with exposed wire technology offering maximum heat transfer and distribution during the welding process. For ease of installation our socket fittings are manufactured with insertion stops to ensure the pipe is fully engaged into the fitting during assembly.

Application

Non-potable water

Pipe Material Polyethylene
Fitting Material Polyethylene
Diameter Range 20 mm to 710 mm Bespoke: No
Max Operating Pressure 16 bar
Compliance / Approvals BS EN 12201-2, WRAS approved material, DVGW GW 335-B2, MPA Darmstadt - K 1597/12.2014
Jointing Techniques

Electrofusion jointing

Jointing Equipment 40 V or 80 V electrofusion control box
Fitting types

Couplers, equal tees, reducing tees, elbows, end caps, reducers, tapping tees, branch saddles.

Product Videos

  • Polyethylene water pipe butt-fusion jointing overview

  • Polyethylene water pipe electrofusion jointing overview

To view all our videos visit our downloads page.